How It Works

Loft It!, inc. uses the residence hall bed, by removing the legs from the springs and installing the springs upon the lofted metal bed frame.  The residence hall mattress is then laid upon the springs.  *All that is required of you, is to keep the bed parts not used (the legs) in your room, so the residence hall bed can be reassembled after you leave at the end of the year.   *(This is a requirement of most College and University Housing & Residence Life Departments.)

Double Loft System: 

This system consists of two twin-sized lofted beds.  They are raised off of the floor by approximately five feet.  Televisions, computers, desks, sofas, bookshelves, stereo equipment, etc. can be placed under the bed to increase the functionality of the residence hall room.  Ladders are provided for each twin-sized bed.  Bedding is not provided.

Single Loft System:

This system consists of a single twin-sized lofted bed.  The bed is raised approximately  five feet off of the floor.  The ladder is built into the bed.  Bedding is not provided.

These loft systems are manufactured to exacting specifications and meet all current and proposed standards for safety.  

These loft systems have been tested by an independent laboratory and found to be in compliance with ASTM Standard F-1427-96 ("Standard Consumer Safety Specification for Bunk Beds").  It also meets all existing and know proposed Consumer Product Safety Codes for bunk beds and institutional furniture.

These loft systems have been full load-tested by PSI, an independent laboratory, and is certified to carry the following continuous loads without catastrophic failure or loss of structural integrity:  1,000 lbs per side and 600 lbs at the center of each ceiling beam.  In the tests, the failure of a single weld or bolt, or even the failure of all bolts simultaneously does not lead to the collapse of the system. 

Bed frame made of all metal parts -- Powder coated for durability  --  Sturdy wooden ladders

All systems and accessories are free-standing, no bolts or screws in walls or ceilings.  Padding included to help prevent scratching of walls